leads4pass nse7_OTS-6.4 dumps come with both PDF and VCE study modes to help you pass the exam easily. nse7_OTS-6.4 dumps: https://www.leads4pass.com/nse7_ots-6-4.html (2022 Latest)
Before I give you some of the exam questions I want to ask you a few questions and then I’ll share my thoughts.
Do you exclude using NSE7_OTS-6.4 dumps?
Are you ready for the NSE7_OTS-6.4 exam?
How much information do you know about NSE7_OTS-6.4?
I know there are many more questions, but I just want to share them here!
I know there are many more questions, but I just want to share some of my above.
Fortinet has been updated with a lot of new projects from 2021 to 2022, which is a good thing! Progress in the industry must be accompanied by renewal. This motivates everyone who wants to get certified to progress!
I’ll start by sharing a partial list of Fortinet exams and some tips:
This is the latest list of exams you can take in 2022, and you can also search on Fortinet‘s official website
Cybersecurity Technical Certification
| NSE4_FGT-6.4 | Available until March 31, 2022 |
| NSE4_FGT-7.0 | |
| NSE5_FAZ-6.4 | |
| NSE5_FMG-6.4 | |
| NSE5_FCT-7.0 | |
| NSE5_EDR-4.2 | |
| NSE5_FSM-5.2 | |
| NSE5_FCT-6.2 | Available until May 31, 2022 |
| NSE6_FAD-5.2 | |
| NSE6_FAC-6.1 | |
| NSE6_FML-6.4 | |
| NSE6_FNC-9.1 | |
| NSE6_FVE-6.0 | |
| NSE6_FWB-6.1 | |
| NSE6_WCS-6.4 | |
| NSE6_ZCS-6.4 | |
| NSE6_FWF-6.4 | |
| NSE6_FSW-6.4 | |
| NSE6_FML-6.2 | Available until March 31, 2022 |
| NSE6_FNC-8.5 | Available until March 31, 2022 |
Cybersecurity Advanced Certification
| NSE7_ADA-6.3 | |
| NSE7_EFW-6.4 | |
| NSE7_ATP-3.2 | |
| NSE7_PBC-6.4 | |
| NSE7_OTS-6.4 | |
| NSE7_SAC-6.4 | |
| NSE7_SDW-6.4 | |
| NSE7_FSR-6.4 | |
| NSE7_ADA-5.2 | Available until May 31, 2022 |
Cybersecurity Expert Certification
| NSE8_811 |
Next, I will answer the previous questions one by one! And share 12 NSE7_OTS-6.4 exam questions.
1. NSE7_OTS-6.4 dumps
Whether you use NSE7_OTS-6.4 dumps or not, you should not exclude NSE7_OTS-6.4 dumps, you spend a lot of money to take the exam, and the ultimate goal is to get certified! Whether you’re through self-study, online practice, teacher training, or choosing to dump, these are the ways to learn! So my answer is to respect anyone’s choice!
2. NSE7_OTS-6.4 exam
Are you ready for the NSE7_OTS-6.4 exam? If you are not, please check out more exam information, you can google useful exam resources, exam practice, free exam dumps, etc., to get the latest and most useful Information to help you improve your pass rate!
3. Fortinet NSE 7 – OT Security 6.4(how much do you know?)
The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions.
The Fortinet NSE 7—OT Security 6.4 exam is part of the NSE 7 Network Security Architect program, and
recognizes the successful candidate’s knowledge of and expertise with the Fortinet products in an OT environment. The exam tests applied knowledge of the design, implementation, operation, and integration of an OT security solution comprising FortiOS 6.4.3, FortiAnalyzer 6.4.3, FortiSIEM 5.3.1, and FortiNAC 8.5.
Get More>> https://training.fortinet.com/theme/kifer/pdf/desc/OT_Security_6.4_Exam_Description.pdf
12 Fortinet NSE7_OTS-6.4 exam questions
Update time: February 11, 2022
Please take our test first, and the answer will be announced at the end of the article!
QUESTION 1:
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
A. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
B. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
C. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
D. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
QUESTION 2:
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
A. Known trusted devices, each time they change location
B. All connected devices, each time they connect
C. Rogue devices, only when they connect for the first time
D. Rogue devices, each time they connect
QUESTION 3:
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
A. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
B. Deploy a FortiGate device within each ICS network.
C. Configure firewall policies with web filter to protect the different ICS networks.
D. Configure firewall policies with industrial protocol sensors
E. Use segmentation
QUESTION 4:
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
A. FortiGate
B. FortiEDR
C. FortiSwitch
D. FortiNAC
QUESTION 5:
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
B. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
QUESTION 6:
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
A. Security
B. IPS
C. List
D. Risk
E. Overview
QUESTION 7:
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related realtime and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
A. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
B. The administrator selected the wrong time period for the report.
C. The administrator selected the wrong devices in the Devices section.
D. The administrator selected the wrong hcache table for the report.
QUESTION 8:
What can be assigned using network access control policies?
A. Layer 3 polling intervals
B. FortiNAC device polling methods
C. Logical networks
D. Profiling rules
QUESTION 9:
Refer to the exhibit.
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
A. PLCs use IEEE802.1Q protocol to communicate each other.
B. An administrator can create firewall policies in the switch to secure between PLCs.
C. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
D. There is no micro-segmentation in this topology.
QUESTION 10:
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then
users should be challenged with active authentication. What should the OT supervisor do to achieve this on FortiGate?
A. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
B. Enable two-factor authentication with FSSO.
C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
D. Under config user settings configure set auth-on-demand implicit.
QUESTION 11:
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?
A. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
B. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
D. In order to communicate, PLC1 must be in the same VLAN as PLC2.
QUESTION 12:
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01. Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
A. The FortiGate-Edge device must be in NAT mode.
B. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
C. The FortiGate devices is in offline IDS mode.
D. Port5 is not a member of the software switch.
Verify Answer:
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 |
| B | C | ACD | D | B | CDE | BD | D | D | D | A | AC |
Ps. 12 Fortinet NSE7_OTS-6.4 PDF: https://drive.google.com/file/d/1sFNiZCWNgCS9oZXEo0Grhvq3CBIzX2be/view?usp=sharing
These are just some of the exam questions and answers, go ahead and choose the latest full nse7_OTS-6.4 dumps: https://www.leads4pass.com/nse7_ots-6-4.html.
Comments are closed.