This is the latest updated Cisco 300-415 dumps for May 2025, containing 457 exam questions and answers. The question types include single-choice, multiple-choice, and drag-and-drop. It comes with PDF and VCE simulation tools, allowing you to choose based on your study preferences. If you’re interested, you can access the latest Cisco 300-415 dumps here: https://www.leads4pass.com/300-415.html. Give it a try and ensure your success!
To thank all candidates, as usual, I’m sharing some of the latest Cisco 300-415 dumps practice questions for free.
Practice Cisco 300-415 dumps online
| Number of exam questions | State | Related |
| 15 (Free) | Latest | CCNP Enterprise |
Question 1:
An enterprise deployed a Cisco SD-WAN solution with hub-and-spoke topology using MPLS as the preferred network over the Internet. A network engineer must implement an application-aware routing policy to allow ICMP traffic to be load-balanced over both the available links. Which configuration meets the requirement?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: A
sla-class sla-class-name preferred-color colors – To set multiple tunnels to use when data traffic matches an SLA class, include the preferred-color option, specifying two or more tunnel colors. Traffic is load-balanced across all tunnels. If no tunnel matches the SLA, data traffic is sent through any available tunnel. In this sense, color preference is considered to be a loose matching, not a strict matching, because data traffic is always forwarded, whether a tunnel of the preferred color is available or not. When no tunnel matches the SLA, you can choose how to handle the data traffic:
Question 2:
Which hardware component is involved in the Cisco SD-WAN authentication process for ISR platforms?
A. ZTP
B. OTPC
C. SUDI
D. TPMD
Correct Answer: C
The hardware component involved in the Cisco SD-WAN authentication process for ISR (Integrated Services Router) platforms is the SUDI (Signed Unique Device Identifier).
SUDI is a mechanism used for device authentication and is often employed in Cisco SD-WAN deployments. It helps verify the authenticity of the device and is part of the secure onboarding process.
Question 3:
DRAG DROP
Drag and drop the devices from the left into order on the right to upgrade the software from version 19 to version 20.
Select and Place:
Correct Answer:
Question 4:
An administrator needs to configure Cisco SD-WAN to divert traffic from the company\’s private network to an ISP network. Which action should be taken to accomplish this goal?
A. configure the data security policy
B. configure the application aware policy
C. configure the control policy
D. configure the data policy
Correct Answer: D
Data policies are used to define routing and forwarding behavior based on various criteria, including destination, source, application, and other characteristics. You can create a data policy to specify the conditions under which traffic should be redirected from the private network to the ISP network.
Question 5:
DRAG DROP
Drag and drop the alarm states from the left onto the corresponding alarm descriptions on the right.
Select and Place:
Correct Answer:
Question 6:
Which plane builds and maintains the network topology and makes decisions on traffic flows?
A. data
B. orchestration
C. management
D. control
Correct Answer: D
In Cisco SD-WAN, the plane responsible for building and maintaining the network topology and making decisions on traffic flows is the Control Plane. The Control Plane in Cisco SD-WAN is managed by the vSmart controllers, which are responsible for orchestrating network policies, maintaining the network topology, and making intelligent routing decisions.
Question 7:
A network administrator is bringing up one WAN Edge for branch connectivity. Which types of tunnels form when the WAN edge router connects to the SD-WAN fabric?
A. DTLS or TLS tunnel with vBond controller and IPsec tunnel with vManage controller
B. DTLS or TLS tunnel with vBond controller and IPsec tunnel with other WAN Edge routers
C. DTLS or TLS tunnel with vSmart controller and IPsec tunnel with other Edge routers
D. DTLS or TLS tunnel with vSmart controller and IPsec tunnel with vBond controller
Correct Answer: C
Question 8:
What does forward error correction addresses in Cisco SD-WAN?
A. reduced application performance degradation related to service degradation
B. applications with occasional invalid data input and poor performance
C. traffic flows with increased delay over a particular transport
D. inefficient traffic forwarding caused by inbound shapers
Correct Answer: B
Question 9:
Which Cisco SD-WAN WAN Edge platform supports LTE and Wi-Fi?
A. ISR 1101
B. ASR 1001
C. CSR 1000v
D. vEdge 2000
Correct Answer: A
Question 10:
Refer to the exhibit.
An administrator is configuring a policy in addition to an existing hub-and-spoke policy for two sites that should directly communicate with each other. How is this policy configured?
A. hub-and-spoke
B. mesh
C. import existing topology
D. custom control (route and TLOC)
Correct Answer: D
Question 11:
How many subnets are necessary in Azure VNet for a WAN Edge device to function in the cloud deployment?
A. CSR is the WAN Edge device that is supported in the Microsoft cloud. The Microsoft underlay cloud fabric performs the management function.
B. There must be three subnets in VNet: management, public, and services.
C. One public subnet is required in VNet. The Microsoft underlay cloud fabric performs all of the routing functions for WAN Edge.
D. Public and services subnets are required in VNet. The Microsoft underlay cloud fabric performs the management function.
Correct Answer: D
In an Azure cloud deployment of a WAN Edge device (like a Cisco CSR), you typically need at least two subnets within your Azure Virtual Network (VNet): one for public-facing traffic (public subnet) and another for internal services (services subnet). The Microsoft Azure cloud fabric handles the underlying management functions, so you don\’t need a separate management subnet. This configuration allows you to separate public-facing traffic from internal services and manage the WAN Edge device effectively.
Question 12:
Which TCP Optimization feature is used by WAN Edge to prevent unnecessary retransmissions and large initial TCP window sizes to maximize throughput and achieve a better quality?
A. SEQ
B. SYN
C. RTT
D. SACK
Correct Answer: D
Question 13:
DRAG DROP
Drag and drop the BFD parameters from the left onto the BFD configurations on the right.
Select and Place:
Correct Answer:
Question 14:
Refer to the exhibit.
vManage and vBond have an issue establishing a connection to each other. Which configuration resolves the issue?
A. Configure the timezone on vBond to Europe/London.
B. Configure the encapsulation ipsec command under the tunnel interface on vManage.
C. Configure a default route on vBond pointing to 172.16.2.254.
D. Remove the encapsulation ipsec command under the tunnel interface of vBond.
Correct Answer: C
Question 15:
Which protocol is used for the vManage to connect to the vSmart Controller hosted in Cloud?
A. PnP Server
B. ZTP
C. NETCONF
D. HTTP
Correct Answer: C
vManage uses NETCONF (TCP 830) to communicate to the controllers, so communication will be unencrypted if there is no DTLS/TLS connection yet formed between them.
…
I’m sure you’ve completed practicing or reviewing all the free Cisco 300-415 dumps practice questions. This is a warm-up gift for you! Feel free to download the full Cisco 300-415 dumps with 457 questions and answers at: https://www.leads4pass.com/300-415.html (PDF, VCE). Guaranteed to help you pass on your first try!
