Free to share the latest updated HP HPE6-A72 exam questions and answers, all exam questions come from the exam laboratory and real-question cracking. All HP HPE6-A72 exam questions shared on this site are provided by leads4pass exam experts. You can get the latest HPE6-A72 dumps, HPE6-A72 pdf, HPE6-A72 exam questions here.
Get the complete HPE6-A72 dumps exam path: https://www.leads4pass.com/hpe6-a72.html (Q&A: 59). All HP HPE6-A72 exam questions have been updated and the answers have been corrected!
Make sure your exam questions are true and valid to help you pass the first exam!
[HP HPE6-A72 exam pdf] HP HPE6-A72 exam PDF uploaded from google drive, online download provided by the latest update of leads4pass:
https://drive.google.com/file/d/1IKq-vl3oSANhWijP5pkUOx6syxAZ3TQu/
Latest update HP HPE6-A72 exam questions and answers online practice test
QUESTION 1
Core# configure terminal Core(config)# vrf Green Core(config-vrf)# exit Core(config)# Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual
interface (SVI) vlan 50 to the VRF created?
A. Core(config-if-vlan)# vrf attach Green
B. Core(config-if-vlan)# ip vpn-instance Green
C. Core(config-if-vlan)# ip vrf forwarding Green
D. Core(config-if-vlan)# routing-context Green vrf
Correct Answer: A
QUESTION 2
Interface 1/1/1 is up Admin state is up to Link transitions: 1 Description: TO_PC-1 Hardware: Ethernet, MAC Address:
00:11:22:33:44:55 MTU 1500 Type 1GbT Full-duplex QoS trust none Speed 1000 Mb/s Auto-negotiation is on Flow control: off Error-control: off MDI mode: MDIX VLAN Mode: access Access VLAN: 1111
Which command will produce the above output?
A. show interface VLAN 1111
B. show interface 1/1/1
C. show interface gigabit 1/1/1
D. show VLAN 1111
Correct Answer: B
QUESTION 3
Which statement is true regarding modern switching requirements?
A. Most older legacy switches had high port bandwidth utilization and were future-proof designed to meet today\\’s
power-over-Ethernet needs.
B. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT
devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
C. While APs are common, most clients are still docked and only require traditional wired connections with only the
occasional dedicated PoE switch to provide power for the low number of devices needed.
D. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of
IoT devices that require security and port authentication options.
Correct Answer: D
QUESTION 4
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as
VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet to port
2/1/2. Which statement is true regarding how Switch-A will forward the packet?
A. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical
interface selection.
B. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
C. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2
per the hash function.
D. Switch-A will forward the packet along with the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash
function.
Correct Answer: D
QUESTION 5
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
A. 8400(config)# interface 2/4/15
B. 8400(config)# interface 1/7/16
C. 8400(config)# interface 1/4/15
D. 8400(config)# interface 2/3/17
Correct Answer: A
QUESTION 6
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing
enabled in the network?
A. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
B. Access-2 (config-if-1/1/4)# vlan access 20
C. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
D. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
Correct Answer: B
QUESTION 7
What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)
A. routing loops
B. costs associated with upgrading from copper to fiber
C. multiple frame copies leading to instability of the MAC address table
D. security issues with a redundant loop indicating to hackers that a back-door exists
E. broadcast storms
Correct Answer: CD
QUESTION 8
Refer to the exhibit.
All four switches in the diagram have been configured with the region name “Aruba1”.
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
A. MST region type
B. MST Bridge ID
C. MST version number
D. MST revision number
E. MST VLAN to instance mapping
Correct Answer: DE
QUESTION 9
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
A. Local
B. EIGRP
C. BGP
D. ISIS
E. RIPng
Correct Answer: AC
QUESTION 10
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
QUESTION 11
Refer to the exhibit.
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1
using SSH. What is the correct command to ping Server-1 from Access-2 to test reachability?
A. Access-2# ping6 172.16.1.97 vrf mgmt
B. Access-2# ping 172.16.1.97
C. Access-2# ping 172.16.1.97 vrf default
D. Access-2# ping 172.16.1.97 vrf mgmt
Correct Answer: D
QUESTION 12
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to
the vrf GREEN.
Which configuration will correct the issue?
A. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
D. Host-B: assign the default-gateway address 10.1.20.181
Correct Answer: B
QUESTION 13
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is
performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
A. No password is set for this account.
B. “password”
C. “forgetme!”
D. The same login password that has lost originally.
Correct Answer: C
Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm
The above content: shared HPE6-A72 exam pdf, HPE6-A72 exam questions And answers, HPE6-A72 exam video, and get the complete HPE6-A72 exam dumps path. For information about HPE6-A72 Dumps from leads4pass (including PDF and VCE), please visit: https://www.leads4pass.com/hpe6-a72.html (59 Q&A)
ps.
Get free HP HPE6-A72 dumps PDF online: https://drive.google.com/file/d/1IKq-vl3oSANhWijP5pkUOx6syxAZ3TQu/
