Share HP HPE0-V14 exam practice questions and answers from Lead4Pass latest updated HPE0-V14 dumps free of charge. Get the latest uploaded HPE0-V14 dumps pdf from google driver online. To get the full HP HPE0-V14 dumps PDF or dumps VCE visit: lead4pass.com . all HP HPE0-V14 exam questions have been updated, the answer has been corrected! Make sure your exam questions are real and effective to help you pass your first exam!
Table Of Content:
[HP HPE0-V14 Dumps pdf] Latest HP HPE0-V14 Dumps PDF collected by Lead4pass Google Drive:
https://drive.google.com/file/d/1HxVstR-wrono8cVOI_Fql6_jMooRv4mq/
[HP HPE0-V14 Youtube] HP HPE0-V14 exam questions and answers are shared free of charge from Youtube watching uploads from Lead4pass.
Latest Update HP HPE0-V14 Exam Practice Questions and Answers Online Test
QUESTION 1
ou are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They
need to accelerate application performance. Which HPE ProLiant Gen10 feature set will address this customer\’s
needs?
A. intelligent system tuning
B. intelligent provisioning
C. CNSA suite
D. scalable persistent memory
Correct Answer: A
QUESTION 2
A customer needs a shared storage solution for a virtualization platform that will host a database application. The
customer is considering an HPE Nimble array. Which feature would lead you to propose an HPE Nimble AF40 over an
HPE 3PAR All Flash array?
A. Fibre Channel Connectivity
B. 10Gb iSCSI support
C. Supported by Infosight for predictive analytics
D. Predictable performance event with one failed controller
Correct Answer: C
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/a00008273enw.pdf
QUESTION 3
A customer plans to back up a file server that holds 2 TB of data
The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network
solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)
A. FlexFabric 5900
B. StoreEasy 1450
C. StoreVirtual VSA
D. Aruba 2900
E. StoreOnce 3100
Correct Answer: AE
QUESTION 4
A client needs a data center network for a highly-virtualized server environment. They have the following requirements
1.
25 Gb connectivity from the servers to the top-of-rack switches
2.
support for iSCSl storage
3.
lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different
top-of-rack switches within the data center
4.
support for Python script interpretation and open APIs
Which networking product line and architecture should you recommend?
A. ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches
B. ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing
VSX between cabinets
C. ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf
D. HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access
switches configured using IRF stacks per cabinet
Correct Answer: A
QUESTION 5
A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard
Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for
additional equipment that may be added in the future.
How should the solution integrator respond\’?
A. HPE G2 Advanced racks allow additional PDUs to be added if additional equipment requires more outlets or more
available power
B. HPE Standard Series G2 PDUs allow additional inlet power cords to support additional equipment in the future.
C. HPE PDUs support elevated temperatures up to 75 (1673F), in case the additional equipment power draw results in
increased heat generation.
D. Two HPE Standard G2 PDUs will support 42U of racked equipment, so any equipment added in the future will be
accommodated by the current PDU configuration
Correct Answer: B
QUESTION 6
What should you configure to limit the scope of broadcast domains in an Ethernet network?
A. Trunks
B. VSAN
C. Static ARP
D. VLAN
Correct Answer: D
Reference: https://assets.ext.hpe.com/is/content/hpedam/documents/a00069000-9999/a00069468/a00069468enw.pdf
QUESTION 7
A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be
replicated to the main data center with built-in deduplication What should the customer install at the branch office?
A. StoreOnce 3100
B. StoreOnce VSA
C. MSA 2042
D. Storevirtual VSA
Correct Answer: D
QUESTION 8
You are designing a system for a customer that has a contract with a government agency. The contract requires the
highest level of security algorithms possible. Which HPE ProLiant Gen10 feature set will address this customer\’s
needs?
A. CNSA mode
B. FIPS 140-2 mode
C. high security mode
D. production mode
Correct Answer: A
QUESTION 9
What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup
system and its capabilities without emulation?
A. Recovery Manager Central
B. Catalyst Target
C. Virtual Tape Library
D. NAS Target
Correct Answer: A
Reference: https://www.hpe.com/emea_europe/en/storage/rmc-backup.html
QUESTION 10
You are provisioning a new virtual disk group on a MSA storage system. Which disk group parameters must you specify
when creating the vdisk? (Choose three.)
A. RAID level
B. LUN number
C. type
D. cache size
E. name
F. volume size
Correct Answer: ACE
QUESTION 11
You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade
to be activated on the first switch before beginning to install the firmware on the second switch. What must you do to
install the firmware on the second switch?
A. Perform a hot reset on the first switch to initiate the installation on the second switch
B. Reactivate the upgrade on the first switch before attempting to update the firmware on the second switch
C. Reinitialize the devices attached to the first switch before installing the firmware on the second switch
D. Perform a hot reset on the second switch after the first switch is activated
Correct Answer: A
QUESTION 12
A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering
implementing Kerberos network authentication in their environment. Which impact will this have when using iLO 5 with
their HPE ProLiant Gen10 servers?
A. It will enable two-factor authentication when users log on to iLO.
B. It will enhance iLO security by leveraging the key stored in the silicon root of trust.
C. It will allow the servers\’ iLO to detect compromised firmware code.
D. It will enable Zero Sign In to log in to iLO without entering a user name and password.
Correct Answer: D
QUESTION 13
Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and
servers in an environment?
A. InfoSight
B. OneView
C. Insight Remote Support
D. iLO Federation
Correct Answer: B
Lead4Pass HP Discount Code 2021
For the full HP HPE0-V14 exam dumps from Lead4pass HPE0-V14 Dumps pdf or Dumps VCE visit: https://www.lead4pass.com/hpe0-v14.html (Q&As: 287 dumps)
ps.
Get free HP HPE0-V14 dumps PDF online: https://drive.google.com/file/d/1HxVstR-wrono8cVOI_Fql6_jMooRv4mq/